Consultation Flow :
I'm Looking for
Get Started Now Our specialist will get back to you within 1 working day!

2 Feet Low Voltage AC/DC 12V-36V Bi-Pin G13 Base T8 LED Tube Light

FSKU: LL-T8-AP-DC-2FT
*2 Feet 10W T8 Tube
*CRI80, 80LM/W, 100LM/W and 130LM/W selectable
*12V-36V T8 LED Tube, the tube can work with power from 12V, 24V and 36V.
*Ideal for 12-36V DC Automotive RV Marine lighting system.
*, DO NOT put into 110V, check the voltage what you currently have to avoid return or pop up.
$3.43-$4.9   
Datasheet Downlaod
Rated Wattage Beam Angle Diameter Dimming Material Fluorescent Equ. Certification Retrofit Driver Type
10W 160° 26mm Non-Dimmable Aluminum + Plastic 25W CE RoSH FCC Directly Powered Voltage-Boosting Driver
Offering & Difference
*2 Feet T8 Tube
*G13 Bi-pin base
*Dual-end power feed
*CRI80,80LM/W, 100LM/W and 130LM/W selectable
*12V-36V T8 LED Tube, the tube can work with power from 12V, 24V and 36V.
*Ideal for 12-36V DC Automotive RV Marine lighting system.
* DO NOT put into 110V, check the voltage what you currently have to avoid return or pop up.

STOP: These light cannot be used on a 120v AC fixture.
•Turn off the RV main power (battery disconnect button). Ensure the lights will not illuminate before proceeding
•Remove the tubes. Some tubes pull straight down, others need to be rotated 90 degrees and then pulled down.

STOP:  Before proceeding, test fit the new LED tube lights in your fixture with the fixture diffuser cover on.
Do not turn power on to the fixture when test fitting. Remove the pin protectors to test fit the tube. Remove the new LED tube after test fitting and continue
No reviews yet. Be the first one to write it.